Thermal Resistor Wall Water Cooler , Energy Saving Wall Mounted Hot Water Boiler

Plastic Case Wall Mounted Instant Hot Water Dispenser Red Color Touch Screen

Products simple description :

Thank you for using the new generation multifunctional rapid heater

Wall-mounted instant boiling water heater GWS-8B24 has following functions and features:

(1) Cooling function, temperature low as12 ℃

(2) Water output within 3 seconds, boiled water without waiting

(3) Touch screen, user friendly

(4) Intelligent program control; output water with required temperature and volume, operation simplified.

(5)Fashionable and exquisite appearance, high quality.

(6) 3 steps of boil dry protection in sequence, liquid level alarm, thermal resistor, and temperature control.

Technical Parameters:

Working Process and Process Flow:

Products operation :

• Afterinstallation and get charged, the indicator will show as “FO”, which means “no water”. Touch any button to pump up water. The inner-cooler real-time temperature will show on the monitor. If no actions in 60 seconds, the machine will turned into “locked mode” and the “LOCK” indicator will be on. Another 60 seconds will turn the machine from “locked mode” into “sleeping mode”.

Instructions for Function Buttons :

• LOCK: When on, cooling and heating functions will not work. Touch “LOCK” for 1 second before using other function buttons.

• COOLING: Touch “COOLING” to have the machine working in “cooling mode”, in which the indicator is in orange. Until the inner-cooler temperature reaches 12 ℃, the function will automatically stop, then the indicator is in green. Or you can touch “COOLING” whenever you want to stop the work.

1.COLD: One touch will release around 150ml cold water, or you can stop it whenever by touching it again. The LED monitor will show the real-time temperature inside the inner cooler.

2.HOT/150ml: After touching, the heater starts to work and the LED monitor will show the real-time temperature inside the heater. Once the temperature reaches 99℃, 150ml water will be released from the outlet. Or you can touch “HOT/150ml” whenever you want to stop the work.

3.HOT/250ml: After touching, the heater starts to work and the LED monitor will show the real-time temperature inside the heater. Once the temperature reaches 99℃, 150ml water will be released from the outlet. Or you can touch “HOT/250ml” whenever you want to stop the work.

CAUTION: Please do touch the outlet when the machine is releasing hot water(99℃).

Products photo as following:

Daily Maintenance:

1. Do not place any part of this dispenser in water or any other liquid.
2. Place the dispenser away from direct sunlight.
3. Keep the dispenser out the reach of Kids.
4. Don’t remove the cup when hot water is streaming out.

Organic media is not allowed to be used for cleaning the surface of the machine.

Contact details:

NINGBO GOOD WATER SOURCE ENVIRONMENTAL PROTECTION ELECTRICAL APPLIANCE CO.,LTD

Contact person: Jack Liu

Contact phone: (86) 13884494576

Skype: jackliu06316

Wechat: Jackliu8886